Wall mounting your PC is something that most gamers aren’t particularly fond of. Usually, folks prefer it when their RGB rig shines like a spotlight on their table next to the monitor. And rightfully so, since it creates an unreal aesthetic that is to die for.
Still, you’d be surprised at how amazing a PC mounted on a wall looks. These chassis are built with the idea of being hung on a wall. As a result, they’re pretty much glowing with creativity from every orifice.
The PC falling on your monitor and damaging your entire setup is probably something you’re deeply concerned about. However, these cases are built with the safety of your system in mind and ensure that once you hang it up, it stays there.
If you’re looking for a brand-new wall-mounted chassis, you’re at the right place. Here’s our review of the three best wall mount PC cases on the market.
- The Top 3 Wall Mount PC Cases In 2021
- Thermaltake Core CA-1G4-00M1WN-06 Case
- Thermaltake Core TG Snow
- Thermaltake Core P5 Titanium Edition
- 6 Features You Need To Look For To Find The Best Wall Mount Chassis
- Frequently Asked Questions (FAQs)
Wall Mount PC Cases Comparison Chart
|Features||Core P3 ||Core TG Snow||Core P3 TG
|Measurements ||7.3 x 21.6 x 21.3||18.5 x 13.11 x 20.16 ||25.2 x 25.2 x 7.6
|Types||Mid Tower||Mid Tower||Mid Tower
|Motherboard Support||ATX, E-ATX, Mini ITX||ATX, Mini ITX, M-ATX||ATX, Mini ITX, M-ATX|
|Cooling Method||Water||Water||Water, Air
|I/O Ports||2xUSB 3.0, 2xUSB 2.0, HD Audio||2xUSB 3.0, 2xUSB 2.0, HD Audio||4xUSB 3.0, HD Audio|
|Weight||27 Pounds||24.9 Pounds||35.9 Pounds
The Top 3 Wall Mount PC Cases In 2021
To make this the only buying guide you would need for your PC mounting ventures, we scoured the internet and found three of the best cases from Thermaltake, the industry leader. These cases are phenomenal in every aspect and offer an impressive price-to-performance ratio. So, let’s see what makes these wall-mount PC cases special.
The Core CA-1G4 from Thermaltake is one of the best-selling wall-mount PC cases on the market. With its unique blend of functionality and aesthetic, there’s no way this case deserves any spot other than the number one on our list.
The Core Chassis comes with tempered glass that has a thickness of 5 mm to provide a clear view for aesthetics and the utmost level of durability possible. In addition, its highly versatile design gives you enough wiggle room to fit in all your hardware and cooling solutions.
The Core PC Case also supports a liquid cooling setup to keep your system under the right temperature. Thermaltake wanted to give you a ton of customization options with the Core P3. This is why the possibilities with this PC case are truly endless.
The case has all the proper mods and tools required to customize it however you like with its modular design. This means that you can take apart any individual component of the case and build it from scratch according to your preference.
Apart from that, Thermaltake also gives you mounting options for the GPU. So, you can either go the traditional way and mount the GPU vertically or spice things up by going horizontally. Either way, you have all the mounting brackets you need to make your dream setup a reality.
On top of that, you’re free to put the case however you like. The Core PC Case has a three-way placement layout; wall mount, vertical and horizontal. So, if your eyes get tired of seeing one of the layouts, you can just switch to a different one, and it’ll look like a brand-new case.
Another exciting part about the Thermaltake Core is the sheer amount of purchasing options you’re presented with. This case supports all three mainstream motherboard sizes; ATX, E-ATX, and Mini ITX.
Moreover, you get the obvious color options: black, white, and an eye-catching red.
Finally, you have the cherry on top with six different styles; P3, P5, P90, P7, P8, and P1. All of these are different in shape and size, so you’re free to do a bit of browsing and see which one would look best with your setup.
We’ve already mentioned that this case is compatible with liquid cooling solutions. However, it’s not just compatible; it excels at it.
The case is Tt LCS Certified, a test that chassis are put through to determine their liquid cooling support. So, if you’re running a high-end rig that requires a beefy cooling system, the Thermaltake Core has you covered.
- 5mm thick, durable front panel
- Modular design allows you to customize your build
- Vertical and horizontal GPU mounting brackets included
- Support three-way placement
- Compatible with most motherboard sizes
- Tt LCS Certified
- The PCIe Riser is faulty, but the GPU in the default mount works perfectly
- The open case design gathers dust pretty quick
We’ve already established that Thermaltake is the leader in the wall mount chassis industry. Their Core TG is more of the same excellence as the simple Core chassis above. So, let’s see how the TG Snow compares against the earlier product.
Similar to the Core CA, Thermaltake beefs up the front panel glass to ensure durability. Again, it’s the same tempered glass with a 5 mm thickness that not only looks good but offers decent protection as well.
In terms of motherboard compatibility, the Core TG does change things up a bit. It supports ATX, Mini ITX, and M-ATX instead of the E-ATX in the PC case above. It’s good to have support for a wide range of compatible sizes across the board. No matter which motherboard you have, some Thermaltake cases out there will undoubtedly have your back in terms of support.
The Core TG also has the option to mount your GPU vertically or horizontally. So, you can either cherish the chic name across the side of your card or enjoy the heat sink view from the front.
However, the problem with the PCIe riser is common across the board with Thermaltake cases. It may prevent you from using the mount vertically, which is a bummer, but if you can get the riser to work, you’re good to go.
This is a huge drawback, though, since one of the major selling points of this case is the alternative GPU mounting positions. Still, there’s not much you can do about it. This is practically the only con of these Thermaltake cases since they compensate for it with other features.
Additionally, there are three variants of the Core TG in circulation. The first is a matte black build called the Core P1 TG. The second is a pure white design which is appropriately named the Core P3 TG Snow. Finally, the third is an L-shaped design with two individual front panel glasses to give your setup an extra element to stand out.
- Works well with ATX, Mini ITX, and M-ATX motherboards
- It fully supports liquid cooling
- Dual GPU mounting options
- Durable front glass
- Aesthetic open design
- The user manual doesn’t make it easy for beginners to create the setup
- PCIe riser cable has issues.
Coming in at number three is the Core P5 Titanium Edition from Thermaltake. This is sort of a wildcard on this list due to its multipurpose functionality. You can place it on your desk like any other case or hang it on your wall if you prefer it that way.
The Core P5 Titanium gives off the same open frame vibes consistent with the Thermaltake wall mount cases lineup. It looks wonky, but it works! Your system will look incredible in this frame.
The best part is that Thermaltake makes it relatively easy to manage cables inside the system. As a result, even a novice in cable management will be able to create a clean and sleek setup.
The Core P5 can be used in three different ways; vertical, horizontal, and wall-mounted, of course. The case is wall-mountable, and it is advertised as such.
However, the only reason why this case was dropped to number three on our list is that it does not come with the mounting brackets necessary to hang it on a wall. Instead, you’ll need to order them separately from Thermaltake, which is a bit of an inconvenience.
Similar to the placement of the Core P5, you can load the GPU onto this case in both horizontal and vertical configurations.
However, the issue of the PCIe riser remains the same across the board. The included riser doesn’t work well if it works at all. As a result, you’ll probably need to find an alternate riser or stick to the horizontal configuration and use the case without the riser.
Aside from that, the case has a relatively decent number of I/O ports on the front. There are four USB 3.0 connectors and an HD audio connector for your headphones.
Thermaltake makes the P5 fully customizable by making the case with a DMD (Dismantlable Modular Design) in mind. You can take out all the individual components and strip the case bare naked to redesign it however you like. The manufacturers made sure that no screw is unreachable and that you can take everything out.
- A generous number of I/O ports
- Can be placed on desk and wall-mounted as well
- GPU can be equipped horizontally and vertically
- Dismantlable modular design
- Mounting brackets have to be purchased separately
- PCIe riser doesn’t work
6 Features You Need To Look For To Find The Best Wall Mount Chassis
Are you still contemplating which of the three cases you should get? Here are some features you need to look for when choosing the perfect wall-mountable PC case.
Compatible Motherboard Sizes
The case you select should have some variety when it comes to supporting different motherboard sizes. Fortunately, this feature is a pretty easy one to find. Most modern cases have different variants that support mainstream sizes, including ATX, M-ATX, E-ATX, and Mini ITX. All three of the products mentioned on this list offer compatibility with these sizes.
When you’re hanging your entire set-up on a wall, it is essential to have some sort of protection. This is to make sure the hardware stays safe if the case ever decides to take a nosedive. Optimally, you should look for a case with thick tempered glass panels with a thickness of at least 3 mm.
Even if you’re water cooling, it’s never a bad idea to throw in some extra air. It helps take the edge off your setup and allows it to perform better, mainly when you’re working with an overclocked processor.
Usually, most closed frame cases have two types of fans. 2-3 fans are placed at the front, which then acts as the intake. Meanwhile, 2-3 fans are placed on the top of the case that serves as an exhaust.
The front fans draw in fresh air while the ones on the top filter out the hot air after contacting the running hardware. However, since the three mountable cases mentioned on this list are all open-framed, you probably won’t have much of an issue with the airflow.
A wall-mount PC is pretty useless if you aren’t able to customize the hardware however you want. Ideally, a good wall-mount case will have module panels and brackets to allow a free build design. This is to give you the freedom to experiment with your system.
Unfortunately, your imagination is the only thing stopping you from building a clean and sleek build. One specific feature you should look for in regards to customization is the GPU mount.
Most folks prefer a vertical GPU mount with a wall-mounted setup since it looks the most elegant. Therefore, make sure that your preferred case can support the GPU mount you’re looking to install.
Not every system demands water cooling, and that’s why not every wall-mount case supports it. However, if you’re running a high-end setup that requires it, you have to find a spacious case to support the water blocks, reservoir, and pump.
With a bit of DIY, you’ll be able to get more than enough room to load up all the equipment in most chassis, even if they aren’t compatible with water cooling. However, if you’re not good with customization or technology, perhaps it would be better to stick to a case that is water cooling compatible.
This is something that depends on personal preference and the type of room you have. For example, if you have an airy room that has a lot of dust flow, you should look for a case with a closed exterior. Otherwise, the hardware inside is going to get choked up with dust in no time.
Moreover, if you end up with an open case, go to town with a blower every week or so, and you should be good to go.
Frequently Asked Questions (FAQs)
The obvious question: Will it fall?
Yes and no. If you know what you’re doing and can mount the PC properly, it’s not going to fall. The cases are built to sustain the heavy weight of your hardware and will stay in the air as long as you’ve mounted it correctly. This should be pretty simple as long as you follow the instructions given in the manual.
Is it challenging to build a PC in a wall-mount chassis?
Yes, it is. Standard cases don’t have a lot of options. There’s only one direct way to build the PC (the manual usually provides all the information you’ll need). When it comes to wall-mount cases, though, they have a ton more flexibility regarding the design. As a result, it’ll take you longer to build this case, even if you have some experience with custom PCs before.
Do I need to water cool the wall-mount system?
Not necessarily. The answer to this question boils down to the type of system you have. For example, if you have something high-end like a Ryzen 5950x paired with a 3090 whirring at full speed, you might want to consider liquid cooling since it’s the preferred way to cool modern hardware.
On the other hand, liquid cooling isn’t needed in older generation hardware. You’re already using an open framed wall-mount case. Since this chassis is a bit of an overkill for drawing in the fresh air, outdated equipment should work just fine without water cooling.
What tools will I need to wall mount a PC Case?
Most of the mounting equipment required for the chassis will be included in the packaging. However, you will need tools like a drilling machine, a screwdriver, pliers, etc., to get the job done.
So, we just reviewed three of the most exemplary wall mount PC cases on the market and talked about the factors you need to know to choose the best one.
Of course, building a wall-mounted PC is a unique experience that will take some time and effort. However, the amount of sheer elegance your setup will have makes it worth the effort at the end of the job. So, do some research, make a list of your requirements, and pick the case that best suits them!